Skip to main content

CPS 1-3-5 single nozzle modification

Written by Ben
Last updated on 2008-01-13


All you have to do to make the CPS 1-3-5 use a single nozzle is fill in all of the nozzles other than the center one with epoxy. Sand the areas you will epoxy with coarse sandpaper and then apply the epoxy.

Let the epoxied areas cure for the time recommended on the bottle and enjoy the improved CPS 1-3-5.


< Discuss at the SSC forums - Print this page >

< http://www.sscentral.org/mods/cps135single.html >