Skip to main content

CPS 3000 or CPS 3200 hose fitting broken

Written by Ben
Last updated on 2008-01-02


Problem

The hose fitting on a CPS 3000 or CPS 3200 is broken.

Solution

Not much can be done aside from replacing the fitting with another one. Below is an image used with permission from an eBay auction showing how one CPS 3000 owner repaired their gun with some sort of bayonet fitting.

All that has to be done, essentially, is to remove the old fittings and attach a new one with something like epoxy.

We do not have a detailed guide to that procedure obviously, so if you need help, post at repairs forum and we'll help. If you successfully repair your water gun, please do make a guide with pictures to help people out in the future.


< Discuss at the SSC forums - Print this page >

< http://www.sscentral.org/repairs/hose_fitting.html >